What does weaving in and out of lanes during heavy traffic do?

14. Weaving in and out of freeway lanes during heavy traffic: Improves traffic flow by creating space for others to merge ……… Causes further traffic congestion by slowing down other vehicles Increases fuel efficiency. ………..

What is weaving on the road?

What Is Lane Weaving? Lane weaving occurs when cars and other large vehicles move from one lane to another repeatedly. You’ve probably noticed some drivers engaging in this practice before as they tried to get into the faster moving lane during rush hour.

When driving in heavy traffic What should you do?

Make smart driving decisions in heavy traffic

  1. Avoid aggressive driving and weaving from lane to lane.
  2. Keep a safe distance, at least three seconds, between you and the vehicle ahead of you. This will help you avoid frequent braking and rear end collisions.
  3. Watch the traffic ahead closely. …
  4. Stay focused.
THIS IS EXCITING:  Does Michaels have Quilling Kits?

Why do drivers have difficulty seeing side traffic?

Why drivers have difficulty seeing side traffic at T-intersections in rural areas? These side streets are hidden because of crops, bushes, or tree overhangs.

When merging with freeway traffic raising a freeway traffic B 5 mph slower traffic C at a speed that Speedd at a posted speed limit?

At or near the speed of traffic on the freeway. Five to 10 mph slower than the speed of traffic on the freeway. The posted speed limit for freeway traffic. Explanation When merging onto a freeway, you should enter at or near the speed of traffic.

What is weaving used for?

Weaving is a process used to create fabric by interlacing threads.

When driving on a four lane you should do which of the following?

On highways with a total of four or more lanes (two or more lanes in each direction), always keep to the right unless you are passing slower traffic, letting another driver have room to enter safely, or getting ready to make a legal left turn. The best way to control your speed is to know how fast you are going.

Where do highway accidents occur most frequently?

According to the National Highway Traffic Safety Administration (NHTSA), most fatal car accidents happen within 25 miles of your home. For nonfatal accidents, more than half (52%) occur within 5 miles of the home, and around 77% take place within 15 miles of a driver’s home.

What is hydroplaning usually caused by?

Hydroplaning occurs when water gets in front of your tires faster than the weight of your vehicle can push it out of the way. The water pressure can actually raise your vehicle so that it slides on a thin layer of water.

THIS IS EXCITING:  What are the weave bead welding patterns?

When you see road workers at a construction site you should obey their instructions?

Unless they conflict with existing signs, signals, or laws. At all times. Explanation Obey special signs or instructions from flaggers. Driving carefully through work zones improves safety for drivers, pedestrians, bicyclists, and road workers.

When driving on curves What should you do to compensate for reduced line of sight?

When driving on curves what should you do to compensate for reduced line of sight? Look through to the end of curves to extend your view of the path of travel as much as possible.

What is it called when your car loses control on wet roads in the rain?

Hydroplaning happens when a vehicle’s tires lose traction with the road and slide over a wet surface.

When changing lanes or making turns you should ensure other cars aren’t __?

Then move safely and smoothly into the center of the desired lane, while maintaining your space in the flow of traffic so that no other vehicle is forced to slow down, speed up, or change lanes to avoid collision. When you change lanes, follow these steps: Turn on your signal. Check your mirrors.

When traveling on a two way street with two lanes in each direction and planning to make a left turn start it in?

1. Left turn from a two-way street. Start the turn in the left lane closest to the middle of the street. Complete the turn, if safe, in either lane of the cross street (shown by the arrows).

THIS IS EXCITING:  How do you adjust the tension on a drop bobbin?

Why do drivers have difficulties?

Why drivers have difficulty seeing side traffic at T-intersections in rural areas? A. These side streets are hidden because of crops, bushes, or tree overhangs. … Drivers don’t expect traffic coming from side streets.