How do I know if my timing is off on my sewing machine?
If your hook tip is passing through or below the needle eye, then the timing of the sewing machine is off. On the other hand, if the hook tip is passing above the needle eye, but extends past the needle more than a couple of millimeters when the needle eye meets the radius of the hook, then the timing is also off.
– Check to see if your upper tension is too tight. Standard tension setting is 4. – Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. – Make sure that the upper thread is threaded properly.
First, make sure the bobbin-winding spindle (located on top of your machine) has been pushed back to the left for sewing. If it is not in the correct position, the needle will not go down and pick-up your bobbin thread.
What causes sewing machine timing problems?
The hooks are the most common issue concerning sewing machine’s timing. The second most common issue is related to the needle. The first step is to check the sewing machine’s timing to make sure that there is a problem. The first step is to check the direction of the rotation of the hook.
Why is my sewing machine needle hitting the plate?
The upper tension is too tight. Properly set the upper tension on your machine. 6. You could be pulling the fabric to hard causing the needle to strike the needle plate.
Why is my industrial sewing machine not stitching?
The machines top thread may not be threaded correctly. – Check the threading path of the top thread and rethread your machine. 2. Make sure the needle thread is behind the needle bar thread guide on the needle bar.
Why is my needle hitting my bobbin case?
The needle is not fitted properly in your machine. 2. The needle clamp screw is loose. Firmly tighten the needle set screw.