How do you make a wooden ladder blanket?

What angle do you cut the legs of a blanket ladder?

Step 1: Cut your wood.

Cut two 6-foot pieces for the sides of your ladder and five 18-inch pieces for the rungs. Next, you’ll want to angle the bottom of the 6-foot sections to 10°. You need to do this so it will be flush and level when you lean your blanket ladder against the wall when it’s finished.

What size is a blanket ladder?

Instructions. DIY blanket ladder dimensions are 60″ by 19″; however, it can be any size you would like. A taller one Cut I x 3 boards (ladder rails) at a 15 degrees angle at each end for a finished length of 60 inches. Cut 1” dowels (ladder rungs) to 18” or desired length.

How tall should I make my blanket ladder?

Once you’ve decided those two things, you’re ready to cut the wood to size. My ladder is 6 feet tall, 18 inches wide, and about 12 inches between the rungs. Once your wood is cut, lay out the ladder on your work surface, and get your drill and screws ready. Measure your ladder, and mark where your rungs need to go.

What can you use a blanket ladder for?

I found so many amazing and creative uses for these old ladders and so today, wanted to share some of my favorites with you!

  • Kitchen Towels. {via The Design Traveler} …
  • Pot Rack. …
  • Dried Herbs/Flowers. …
  • Dining Room. …
  • Wreath Display. …
  • Book Shelf. …
  • Magazine Rack. …
  • Display Shelving.
THIS IS EXCITING:  How do you attach blackout lining to curtains without sewing?

How do you make a pallet blanket?

Construction Steps

  1. Step 1: Dismantle a pallet. First you need an old pallet. …
  2. Step 2: Rip the ladder rungs to width. …
  3. Step 3: Cut the rungs to length. …
  4. Step 4: Sand the rungs. …
  5. Step 5: Cut spacers. …
  6. Step 6: Measure and mark the rung locations. …
  7. Step 7: Position and affix the rungs.