They have either two holes or four holes.
- Step 1: Thread the Needle. Cut about 24 inches of thread. …
- Step 2: Mark the Right Spot. …
- Step 3: Push Needle Through the Backside. …
- Step 4: The First Set of Holes. …
- Step 5: The Remaining Holes. …
- Step 6: Secure the Thread. …
- Step 7: Cut the Thread.
Thread – you’ll need about 12″ to do the whole process. If you double your threads over (a bit stronger and easier to knot), use 24″. Try to use a thread that matches the garment color, but in a pinch, black or navy are unobjectionable. Button – the original, if possible, otherwise simply use what you can find.
Fabric thread – mercerized cotton or general purpose thread is best. Double up for efficient button stitches! Needle – Sharps hand needles, size 9 average works well.
Yes, you can sew buttons on with a sewing machine. … Any sewing machine with a zig-zag stitch partnered with a button sew-on foot can have a button back in place within minutes. Sewing machine companies have had feet to sew on buttons going back to when a sewing machine could first sew a zig-zag stitch.
Sewing on a Button From One Side
- Here’s what I used. …
- Use two layers of the tape to cover one side of the button. …
- Pinch the layer you want to sew the button to, pull it away from everything else, and place a pin to keep it folded (also to mark where the button goes). …
- This is the key step.
Stitch through each hole about four or five times for a shirt button and about six to eight times for a coat button. 4. Once you have finished the last stitch, come up underneath the button (a) (see illustration below) and wrap the thread around the stitching underneath the button a few times (b).
Just follow these steps:
- Double your thread and tie a knot at the ends. …
- Position your button in line with the button hole.
- Push your needle and thread through the underside of the fabric until it stops at the knot.
- Pass the needle through one button hole and then the other.